Pressure independent control valves, DN15-DN25 with integrated flow limiter for thermal emitters and differential pressure regulator
PCTV/PCMTV/PCTVS valves are intended for use in fan-coil units, air handling units, chilled beams, etc. They can be used as constant flow limiters in constant volume systems (without an actuator) or as true PICVs in variable volume systems (with an actuator).
The PCTV/PCMTV/PCTVS valves are temperature control valves with full authority over the entire flow range. This means that each individual terminal receives the flow required even in part load conditions. The PCTV/PCMTV/PCTVS valves do not require any setting ratio calculation or valve authority calculation.
The valves are available in three models, PCMTV that has measuring ports included, PCTV that has measuring port outlets sealed ( can be added later if needed) and PCTVS that do not have any measuring ports at all.
The valves have a compact design that allows them to be mounted in small spaces such as fan-coils or narrow supply spaces.
The valves are supplied with a plastic be used to close them manually.
Intended for on/off control of hot or cold water in heating or cooling systems. The valves can only be used together with Regin's RVAFC actuators.
The ZFCM valves are designed for temperature control in heating and cooling systems. The valves are available as both 2- and 3-way models.
The ZFCM valves can only be used together with Regin's RVAFC actuators. Valves and actuators are ordered separately.
Intended for on/off control of hot or cold water in heating or cooling systems. The actuator has a synchronous motor and spring return mechanism.
The DFCM series’ two-position valves are designed for temperature control in heating and cooling systems.
The actuator is designed to withstand high moisture conditions.
- Spring return mechanism
- Tight closing
- Detachable actuator
- Closing pressure up to 250 kPa
- Supply voltage 230 V AC
- Manual operation