System-matched air-cooled condensers, drycoolers and condensing units ensure continuous, proper operation of data center cooling systems. The units are available in a variety of configurations, including high energy efficiency models and low noise models to best support data center infrastructure.
Liebert Low Profile Drycoolers (1 - 8 Fans) and Liebert 10-Fan Drycoolers
Outdoor Heat Rejection for Glycol Cooling Applications
Liebert Outdoor Drycoolers provide closed-system cooling for pumped glycol heat-transfer fluid, supporting effective data center cooling design.
Liebert Outdoor Drycoolers are available in capacities from 15.75 to 525kW (4.5 to 150 tons), and in 60Hz or 50Hz models. The units are quickly and easily installed because all internal wiring is completed at the factory, with only two electrical connections to be made at the job site.
- Low profile 1- to 8-fan units are constructed with a corrosion-resistant aluminum cabinet and a copper-tube aluminum-fin coil. These units have CSA approval.
- High capacity 10-fan units are constructed with corrosion-resistant galvanized steel frames and multiple copper-tube aluminum-fin coils. These units have UL approval.
Liebert Series PB Indoor Drycoolers provide closed-system cooling for pumped glycol heat-transfer fluid, supporting effective data center cooling design. They are designed for applications where an outdoor heat rejection location is not practical, such as high-rise buildings or areas with restricted access.
Liebert indoor centrifugal drycoolers are available in six models to cover a wide range of applications.
- Indoor system-matched condenser
- Connects easily
- Provides flexible installation in a small footprint
Outdoor Condensing Unit, 3.5-28kW
The Liebert PFH propeller fan condensing units are designed to be used in conjunction with the Liebert Mini-Mate2, Liebert DataMate and Liebert Challenger 3000 evaporator units, supporting efficient data center heat management.
The Liebert PFH Condensers are available in nominal capacities of 3.5 to 28kW (1 to 8 tons). Split-system condensing units are connected to the evaporator unit by two refrigerant lines (four for 28 kW (8 ton) model) and a low voltage control cable. The condensing unit, available in 50 or 60Hz, requires a separate power source and an outdoor disconnect switch.
Indoor Condensing Unit, 7-28kW
Liebert MCD condensing units are designed to be used in conjunction with the Liebert Mini-Mate2, Liebert DataMate and Liebert Challenger 3000 evaporator units, supporting effective data center cooling.
Liebert MCD Condensers are available in nominal capacities of 7kW to 28kW (2 to 8 tons). Air-cooled or water/glycol-cooled split system condensing units are mounted in the ceiling and connected to the evaporator unit by two refrigerant lines (four for 28kW (8-ton) model) and a low voltage control cable. The condensing unit, available in 50Hz or 60Hz, can be wired to a separate power source, or use the evaporator power source when close-coupled together.
Indoor Condensing Unit for Liebert DataMate, 5-18kW
Indoor Water/Glycol Heat Rejection for DataMate Systems
Liebert DMC water/glycol condensing units are designed to be mounted to the Liebert DataMate evaporator units, making a self-contained cooling unit for effective computer room cooling.
Liebert DMC Condensers are available in nominal capacities of 5 to 18kW (1.5 to 3 tons). Water- or glycol-cooled condensing units are mounted to the DataMate evaporator unit, yielding an esthetically pleasing self-contained cooling system. The condensing unit, available in 50Hz or 60Hz, is field-installed to the standard DataMate evaporator unit.